33M Concrete Boom Conveyor Pump is a kind of efficient and flexible concrete conveying equipment, equipped with 33-meter-long multi-section boom, which can quickly complete the long-distance and high-altitude conveying of concrete. This equipment is widely used in construction sites, municipal projects, bridge construction and water conservancy projects, etc. where concrete pouring is required
Phone:
+86-15939037000Email:
wenqiang@manxingim.com
Before starting work, check whether the boom, conveying pipe and hydraulic system are normal.
Avoid overload operation and operate strictly according to the rated conveying capacity of the equipment.
Clean the residual concrete in the conveying pipe in time after each operation to prevent pipe blockage.
Replace the hydraulic oil and filter element regularly to ensure the normal operation of the system.
Check the key nodes and welding parts of the boom every month to prevent structural fatigue.
Check whether the connection of remote control and electronic control system is reliable.
Regularly lubricate the whole machine to ensure smooth operation of all moving parts.
If it is not used for a long time, it is necessary to empty the residual concrete in the pipeline and apply anti-rust oil.
Ensure that the legs are fully extended and stably grounded during operation.
A warning line should be set up in the operation area to prevent non-construction personnel from approaching.
Train operators regularly to improve operation skills and safety awareness.
| Model: MX181THB26 Pump Truck | Technical Parameters | Model: MX181THB26 Pump Truck | Technical Parameters | |||
| Parameters of the whole machine | Overall length | 9000mm | Pumping system parameters | / | / | |
| Total Height | 3360mm | Theoretical concrete displacement | 120m3/h | |||
| Overall width | 2470mm | Distribution valve form | S valve | |||
| Overall weight | 20000Kg | Conveying cylinder bore/stroke | 230/1600mm | |||
| Chassis Model | SAIC Hongyan | Displacement of main oil pump | 190ml/r | |||
| Drive Mode | 4*2 | Conveying pipe inner diameter | 125mm | |||
| Engine Model | Yuchai 240 | Maximum aggregate size | 40mm | |||
| Output power/speed | 177Kw/2200RPM | Concrete caving degree | 160-220mm | |||
| Emission standard | National VI | System oil pressure | 31.5MPa | |||
| Tire Size | 10.00R20 18PR | Hydraulic oil tank volume | 500L | |||
| Wheelbase | 4600mm | Type of hydraulic system | Open type | |||
| Jib leg parameters | Boom vertical height | 33m | High and low pressure switching | Automatic switching | ||
| Boom horizontal length | 29m | Hydraulic oil cooling method | Air-cooled | |||
| Boom vertical depth | 22m | Concrete pipe cleaning method | Water washing | |||
| Boom folding form | 5RZ | Lubrication method | Centralized lubrication | |||
| First section of conveyor arm | Length | 6800mm | Distributor box | Germany Spaul/Zhuji | ||
| Corner | 90° | Accessory Brands | Main oil pump | Germany Rexroth / Puchs | ||
| Second section of the conveyor arm | Length | 5400mm | Boom pump | Pulsar | ||
| Corner | 180° | Constant pressure pump | Pulsar | |||
| Third section of the conveyor arm | Length | 5200mm | Gear pump | Wanliquid | ||
| Corner | 180° | Boom manifold valves | Germany Harvey/Norma/Korman | |||
| Fourth section of the conveyor arm | Length | 5700mm | Boom counterbalance valves | Germany Rexroth/AEM | ||
| Corner | 212° | Valve manifold | American Eaton / domestic | |||
| Fifth interceptor arm | Length | 5900mm | Plates | Sweden imported / Baosteel | ||
| Corner | 180° | Remote control | HBC/Ohm etc. | |||
| End Conveyor Hose | Length | 3m | Electrical Appliances | Schneider/Omron | ||
| Rotary angle of rotary table | ±360° | |||||
| Minimum spreading height | / | |||||
| Front outrigger spread width | 5700mm | |||||
| Rear outrigger spreading width | 6800mm | |||||
| Longitudinal distance between front and rear outriggers | 5900mm | |||||
| The way the stand opens | Front outriggers | X-leg | ||||
| Rear outriggers | Pendulum leg | |||||
